The Sinclair Bullet Seating Depth Tool has been used for decades by handloaders seeking the most accuracy out of their rifles. Our newest model is made from one fourth inch ground and polished stainless steel with one end turned down for use with 17 and 20 caliber rifles and the other end used for 22 caliber and up. This tool helps you determine the length of a loaded round touching the rifling. The Sinclair Seating Depth Tool will work with most bolt action, single shot and AR type rifles. The tool includes a Delrin action guide suitable for most bolt-action rifles (0.690” Diameter fits Remingtons, Savages, Winchesters, and many Rugers). For the most accurate measurement, the Sinclair Bullet Seating Depth Tool uses your fireformed brass and bullets so you can expect an exact measurement, every time. Also available are guides use in AR-15's, AR-10's, and Tubb's 2000's. The guide is a little different than our standard bolt-action guides. This guide inserts into the back of the upper receiver (with the bolt removed). The tool is then used as normal. For best results couple this tool with our Bullet Comparators and a good set of calipers to get repeatable and precise Base-To-Ogive measurements.
¡Optimiza la precisión de tus rifles con la herramienta Sinclair!
La herramienta de profundidad de asiento de balas Sinclair ha sido utilizada durante décadas por los recargadores que buscan la máxima precisión en sus rifles. Nuestro modelo más reciente está fabricado con acero inoxidable pulido de una pulgada de grosor, con un extremo diseñado para rifles de calibres 17 y 20, y el otro extremo para calibres de 22 en adelante.
Características del producto:
- Medición precisa: Esta herramienta te ayuda a determinar la longitud de una munición cargada que toca el estriado del cañón.
- Compatibilidad: Funciona con la mayoría de los rifles de cerrojo, de tiro único y tipo AR.
- Guía de acción: Incluye una guía de acción de Delrin adecuada para la mayoría de los rifles de cerrojo (diámetro de 0.690” que se adapta a Remington, Savage, Winchester y muchos Ruger).
- Mediciones exactas: Para obtener la medición más precisa, utiliza tu brass formado por fuego y balas, asegurando una medida exacta cada vez.
- Guías adicionales: También están disponibles guías para AR-15, AR-10 y Tubb's 2000, con un diseño ligeramente diferente a nuestras guías estándar de cerrojo.
Esta guía se inserta en la parte trasera del receptor superior (con el cerrojo removido). Luego, la herramienta se utiliza como de costumbre. Para obtener los mejores resultados, combina esta herramienta con nuestros comparadores de balas y un buen juego de calibradores para obtener mediciones Base-To-Ogive repetibles y precisas.